Skip to content

RCC 1 2 3 4 5 6 7 8 9 10 11 12 13
  • 1

    Drive Train

    • Easy Access to drives and belts for inspection and adjustment.
    • Stainless steel shaft.
    • Heavy duty bearings.
  • 2


    • Axial Fans.
    • Small tip clearance tolerance.
    • Low air inlet velocity.
    • Minimum noise.
  • 3


    • Smooth faced air entry fan cylinders.
    • Close manufacturing tolerances allow for small tip clearance providing increased efficiency.
  • 4

    Water Distribution System

    • Low pressure stationary type nozzles.
    • Heavy duty PVC spray branches are grommeted to facilitate removal and cleaning.
  • 5


    • Removal of the louvres provides access to all sides of the cold water basin for inspection, cleaning and maintenance.
  • 6

    Make-up Assembly

    • Adjustable water make-up assembly, over flow and quick fill connections are supplied standard.
  • 7


    • Stainless steel construction, anti-vortex design.
  • 8


    • Flanged inlet- and outlet connections.
    • Threaded make-up-, over flow- and quick fill connections.
  • 9

    Cold Water Basin

    • The cold water basin is made of fibreglass reinforced polyester (FRP) and extra reinforced in critical areas.
    • Sloped basin sides with smooth internal finish for easy cleaning.
  • 10


    • The fill is impervious to rot, decay and resistant to fungus or biological attacks.
    • It consists of high efficiency cross-fluted sheets, solvent welded into lightweight blocks.
    • Blocks are sized for easy handling and removal for cleaning.
  • 11

    Drift Eliminators

    • UV resistant non-corrosive material, impervious to rot, decay and biological attack.
    • Three distinct changes in air direction to reduce drift loss significantly.
    • Assembled in easy to handle sections, which can be removed for access to the equipment interior.
  • 12

    Access Door

    • The larger the access door is easily removable to provide complete access to drift eliminators, spray system and fill.
    • Larger units are equipped with anchor points to secure door when removed.
  • 13


    • Models RCC0505 to RCC0707 utilise direct drive motor.
    • Larger units have the fan motor outside of the moist discharge air stream, and use belt drives.
    • Belts provide reliability and long service life with low maintenance requirements.

RC Series RCC

Evaporative Condensers

Key Features

  • Dual Coil Construction
  • Multiple Fan Construction
  • Full Internal Access

Key Benefits

  • No Plume
  • Reduced Water Consumption
  • Reduced footprint compared with other water saving products


Combined flow, Axial Fan, Induced Draft

Key Features

Pultruded Fiberglass Construction

The use of high strength Pultruded Composite components for the primary structure combined with B.A.C.’s patented Bonded Panel to Post Connection offers many advantages over conventional hand laid or chopped strand fibreglass construction methods. Pultruded composites possess a superior strength to weight ratio of up to five times that of chopped strand fibreglass.

Full Size Access Panel

The large access panel is fitted with easily removable knobs. Removing the access panel does not require any tools or dismantling of the unit structure, providing unparalleled access to all of the internal components for inspection, cleaning and maintenance.

Highly Configurable Design

The product has been designed to be highly configurable to make installation easier. The ability to select motor and connection locations saves installation piping and wiring costs.

Key Benefits

Robust Construction

High level build materials along with exceptional design standards assist in creating a highly reliable and consistent product.

Easy Access for Maintenance

Special considerations taken into account during the design process  make for ease of access during maintenance. This in turn allows for reduced costs during servicing from both mechanic’s time and unit “down time”.

Low Height

Reduced height design, allowing for placement in spaces where other product would become more visible.

Principle of Operation

rcf principle of operation

1. Air In

2. Air Out

3. Vapour In

4. Vapour Out

6. Cold Water Basin

7. Water Distribution System

8. Coil

9. Spray Water Pump

10. Eliminators

The vapour to be condensed is circulated through a condensing coil, which is continually wetted on the outside by a recirculating water system. Air is simultaneously drawn upward over the coil, causing a small portion of the water to evaporate. This evaporation removes
heat from the coil, cooling and condensing the vapour in the coil.








For any further information on this product range please feel free to contact us at the link below, or feel free to visit our International Resource Library.


  1. * indicates required field

Need help finding what you need? Contact Us.